Frame Protection XXL glossy Fuji Flow color - unleazhed
€49.99
- Development and production mainly in Germany
- Products tested multiple times
- Fast shipping
- Convenient purchase on account
- 350,000+ customers trust Unleazhed
MTB frame protection film · XXL
XXL.
Explore the highlights.
Our XXL MTB frame protection film combines main frame and rear triangle protection with your own look. Explore what is in your kit and how to apply it.
Universal shapes
Pre-cut pieces you can arrange to suit your frame.
Strong material
Tear-resistant, self-adhesive paint protection film – up to 275 µm.
Your look
Clear or printed. Every XXL design in matte and glossy.
Made in Germany
Developed by us and manufactured in-house.
Application and design examples · independent of your selected pattern
World of MTB magazine
Best of 2024.
Featured.
Our frame protection film featured in World of MTB magazine’s Best of 2024.
35Film pieces.
One XXL kit.
Three sheets of pre-cut shapes for the exposed areas of almost your entire frame. Choose the look with your selected design.
- Sheets
- 3 × 22.5 × 30.5 cm
- Coverage
- Main frame and rear triangle
- Material
- Paint protection film · up to 275 µm
- Finish
- Matte or glossy
MTB frame protection · from top tube to rear triangle
Main frame. Rear triangle.
Protected.
Stone chips on the down tube, abrasion on the stays or contact with the top tube: our XXL MTB frame protection film covers the most exposed areas of almost your entire frame.
- Top tubeProtection for the upper frame surface
- Down tubeProtection against abrasion and stone chips
- Seat tubeProtection for the seat tube
- Seat staysProtection for the upper rear triangle
- Chain staysProtection for the lower rear triangle
View XXL film dimensions
- Top tube
- approx. 95 cm
- Down tube
- approx. 63.6 cm
- Seat tube
- approx. 31.6 cm
- Seat stays
- approx. 38.5 cm per side
- Chain stays
- approx. 38 cm per side
These dimensions describe the total length of the film pieces for each protection area, not the length of your frame tube. Layout and coverage depend on the shape of your frame.
Play product videoClose video
Bike paint protection film · self-adhesive
Our film.
Up close.
Our tear-resistant paint protection film helps reduce scratches, abrasion and stone chips on the covered frame surfaces. We develop and manufacture it in-house in Germany.
Our existing product video takes a closer look at our frame protection film. Shapes, material and application – explained with the film itself.
Watch the product video on YouTubeYour finish · matched to your frame
Matte or
glossy?
All our XXL films are available in matte and glossy finishes – both clear films and printed designs. We recommend glossy film for glossy frames and matte film for matte frames.
Glossy
For glossy frames. Keeps the glossy look.
Matte
For matte frames. Matches the matte look.
Select your finish in the purchase area above.
Applying bike protection film
Prepare.
Apply. Ride.
Dry application is possible. For dark frames, we recommend wet application with our #EASY APPLY application gel. Our full instructions explain the application and finishing steps.
Prepare the frame
Clean and degrease the surfaces with a cleaner suitable for your bike. The paint must be undamaged and fully cured.
Position the shapes
Hold the pieces against the frame first. Scan the packaging QR code for the application plan and apply at 20–22 °C.
Let the adhesive bond
Finish the film as described in our instructions. Leave your bike for 24 hours, then press the film down again.
Read the full BP01 instructions before applying the film.
Matching extras
Your frame is
just the start.
Your XXL kit protects the frame. Add matching films for your suspension fork, handlebars, crank arms and additional abrasion points.
- Fork protection filmFor your suspension fork lowers.
- Add-on protection filmFor crank arms, smooth handlebar surfaces and abrasion points.
Good to know
Questions about
XXL frame protection?
Will the XXL film fit my mountain bike?
The universal shapes are designed for different frame shapes. Hold the pieces against your frame and check the coverage before applying them. XXL protects the top tube, down tube, seat tube, seat stays and chain stays.
Can I use the film on aluminium and carbon?
Yes, on suitable aluminium and carbon frame surfaces and on intact, fully cured paintwork. Clean and degrease the surface before applying the film.
Do printed designs provide the same coverage?
Yes. Clear and printed XXL designs provide the same coverage. Both are available in matte and glossy finishes. The pattern changes the look, not the protected frame areas.
Can I use the standard XXL kit on an e-bike?
Yes, if the shapes suit your compatible frame surfaces. Dedicated E-bike XXL kits have 33 pieces instead of 35 and wider down tube films. Reliable adhesion cannot be guaranteed on plastic battery covers. Apply the film only to suitable frame surfaces; for bikes with plastic battery covers, we recommend our standard kits.
How do I remove the bike protection film?
Warm the film pieces with a household hairdryer, then slowly peel them off at a 180° angle. Follow the temperature and application guidance in our BP01 installation instructions.
Product information "Frame Protection XXL glossy Fuji Flow color - unleazhed"
The only bike protection that your bike needs!
Produced directly at our headquarters in Germany! Short distribution channels, locally produced!
With a thickness of 275 µm, this frame protection film is one of the most stable films on the market.
A great feature of this protective film is the extremely easy application, so we raise the topic of bike protection to a new level!
No water, no squeegee, nothing! Clean, simply stick on, done!
The films protect the most important places on the bike (top tube, down tube, rear).
Our paint protection film can be applied to any bike, whether as MTB protection for enduro, trail, all mountain, cross country, downhill, freeride and dirtjump as well as for gravel, road bike, trekking and city bike or all of them in the e-bike variant.
A good price-performance ratio is important for us, so there is so much frame protection that it is really enough for your bike, without you having to buy something again!
Make your decision from different designs or a clear film without pattern and without yellow tint!
Unleazhed GmbH, Premium Quality - Made in Germany
Key Features:
- The frame kit consists of foils for the top and down tube
- Scope of delivery: three sheets each width 22,5 cm x height 30,5 cm
- 35 individual parts
- Material thickness: 275 µm
- Extremely tear resistant
- Self-adhesive material
- Shapes cover almost the entire frame
- After cleaning the frame, the film can be quickly and easily dry-applied.
- Removal of the film is very easy and without residues
- Made in Germany
Choose your foil set size from 4 different variants each in matte or glossy:
Set XXL:
Frame Protection for top tube, down tube, seat tube and the complete rear (seat and chainstays).
35 single parts (e-bike 33 parts)
Set L:
Frame-Protection for top tube, down tube and seat tube
19 individual parts (e-bike 17 parts)
Set S Top Tube:
Frame-Protection for your top tube and other parts on the bike
10 single parts
Set S Down Tube:
Frame-Protection for your down tube and your seat tube
9 single parts (E-Bike 7 parts)
E-Bike Frame-Protection:
Our paint protection films are also available in the e-bike variants Clear and Sons of Battery.
Information on product safety according to GPSR
Manufacturer:
unleazhed GmbH
Dresdner Str. 313, 01705 Freital, Germany
www.unleazhed.com
E-Mail: info@unleazhed.com
